M
atters Needing Attention
Please read the following carefully before any operation.
Warning
In order to avoid any potential personal injury as well as loss or damages to equipment or
property, please DO follow the basic instructions as given below. Such instructions include with
limitation to the following:
Power supply/power wire
• Please hold the plug other than the power wire when
trying to remove the plug from sockets. Pulling the
power wire may result in damages.
• Please do NOT place the power wire anywhere near
the heat source. Please do NOT bend or buckle the
power wire or place it where it may be stepped on or
may trip passer-by.
• This equipment is connected to the power grid through
the plus, so when any fault or danger occurs, the user
should remove the plug from the socket to disconnect
the equipment from power grid, therefore, it is important
to place the power socket where it is easily accessible.
• When the power switch of this equipment is "OFF", the
equipment is not disconnected from the power source;
therefore, for purposes of safety, the user should remove
the plug from power socket when the equipment is not in
use.
Installation Location
• Please disconnect the equipment from power source
before relocation.
• In order to avoid deformation of the panels and
damages to components, please do NOT place the
equipment where there is excessive dust, vibration or
extreme cold or hot conditions.
• Please keep this equipment off water drops or splash or
vase filled with water or any other articles of similar
nature.
Connection
• Please disconnect the power supply when the
equipment is connected to any other equipment. Please
turn the volume down to the minimum level before
switching on or powering off the equipment.
• Symbols of
on any terminal in the equipment
indicate that such terminal is live and dangerous and any
connecting operation should be done by trained
personnel.
In case any abnormal condition is detected,
• If the power wire is worn or damaged, resulting in
sudden interrupt of sound or abnormal smell or smoke
during use, please cut off the power supply immediately
and have the equipment inspected by professional
personnel.
Matters needing attentions in operation
• Please do NOT put your finger in any gap or opening
of the equipment.
• Please keep any foreign matters (paper, plastic or metal)
from being inserted in any gap or opening of the
equipment. In such cases, please cut off the power
supply immediately.
• Please do NOT put any part of your body or any heavy
object on the equipment and please be careful when
operating any button or switch of the equipment or when
connecting the equipment.
Please do NOT disassemble the equipment
• Please do NOT remove the cover of the equipment;
otherwise you may get an electric shock.
• Please do NOT attempt to disassemble any component
of the equipment or make any modifications in whatever
manner. If any abnormal phenomenon is observed,
please stop using the equipment immediately and have it
inspected by professional personnel.
Other Precautions
• Our company will be take responsibility for data loss
or
damages
resulting
from
improper user
or
unauthorized modifications.
• All figures included in this Manual are for description
purposes and there may be slight difference in your
actual application. Please refer to the actual product.
