* *
Fire/Public Address System
Network Address System
1 Channel Network Audio Terminal
MAG6801
9
Precautions for safety in use
1 Safety precautions
Please do NOT connect the power plug of this equipment to the power source before the system is
properly connected.
The user should make sure that the input voltage to this equipment agrees with the voltage requirements,
otherwise, the equipment may be damaged.
There is dangerous voltage in the equipment which can cause electric shocks, so do NOT remove the
case without authorization in order to avoid electric shock.
When the power switch of this equipment is "OFF", the equipment is not disconnected from the power
source, therefore, for purposes of safety, the user should remove the plug from power socket when the
equipment is not in use.
Please do NOT place the equipment where it is too cold or too hot.
The user should make sure the installation position is well ventilated, otherwise the heat generated
during equipment operation may build up and damage the equipment.
Please remove the plug from power socket during cloudy or humid weather or when the equipment is
not in use for a long time.
Please remove the plug from power socket before any component is removed or re-installed or any
equipment is disconnected or re-connected, so as to ensure that the equipment is completely
disconnected from the power source.
When any fault occurs, please do NOT remove the case for repair without authorization, in order to
avoid accident or further damages.
Please do NOT place any corrosive chemicals on or near the equipment.
2 After-sales services
Our Company provides a three-year warranty (including free replacement of damaged parts) against
any fault occurring under normal use in accordance with this User Manual as from the purchase date.
In such cases, the user must provide the user's page of the Warranty Card and the purchase invoice of
such product.
The following will be expressly excluded from the warranty:
（
1
）
Product damage due to improper installation, use or handling;
（
2
）
Product damages due to abnormal conditions (such as over-voltage or excessive ambient
humidity);
（
3
）
Product damages due to an Act of God or accidents;
（
4
）
Product serial number is changed, altered or removed;
（
5
）
Product is repaired or modified by unauthorized person.
Please keep the User Manual and Warranty Card in good custody.
For information about matters not covered in this User Manual or for other matters needing attentions,
please contact the dealers or visit our website:
In case any fault occurs during the warranty period, please contact the service personnel of our
company (or the dealer), our company will not be responsible for any and all damages caused by
unauthorized disassembly or repair by unauthorized personnel.
