* Public Address System Intelligent Public Address System
22
4
—
12
Chime setting
This is to set the chime to which the “chime” button on the main interface corresponds. The operation method is
similar to that of the hourly chime setting (see 4-6.4). Finally click the “confirm” button and return back.
4
—
13
Monitor Selection
4
—
13.1
If you selects the auto- monitor mode in the “General Setting” (refer to 4-3), click on a partition or an
audio source, the system will automatically track the corresponding partitions or audio source for
monitoring without additional setting.
4
—
13.2
If you want to avoid the automatic monitoring, click on the “Monitoring selection” button in the “system
setting” to pop up the monitor interface, click on any partition or audio source, the system will
immediately monitor the corresponding partition or audio source (the monitoring pattern will appear on
the screen); click on the monitor pattern again, to cancel the monitoring.
4
—
14
DSPPA player or built-in CD program playback
Open the play interface on the “System Setting” to select the programs, then operate it according to the steps as
ordinary CD machine. The specific steps are as follows:
4
—
14.1
Click on “DSPPA player” or “built-in CD” button on the ‘system setting”, to pop-up the program
playing window.
Or select “click on the built-in DSPPA or CD audio source pop-up program player window” in the "integrated
settings", then directly click on the DSPPA or CD audio button, to pop up the corresponding program playing
window.
4
—
14.2
The program box is on the right side of the program play window, which lists the names of programs
built into the system. Click or drag the vertical scroll bar on the right side of the program box, to see
more program names. When you see a satisfactory program, click it, then the program name will be
reversed, and the program will start playing immediately.
If a program name is blinking, it indicates that the program is playing.
4
—
14.3
If there is no program in the DSPPA program box, you need to call up the "Edit Default Program" menu
from "System Setting" (see 4-7.3). If there is no track in CD program box, it means CD is not installed. It
is necessary to open the CD disc tray (at the lower part of the panel) to load the disc. After a moment, the
track will appear automatically.
4
—
14.4
To stop or pause play, click the button Stop or Pause;
You can set whether the current program or all programs are played repeatedly, click on “Single Cycle” or “List of
Cycle” or “No Cycle” to select them;
You can select the sequence of program playing, click on “Sequential Play" or “shuffle play” to play.
There is a playback progress bar below the playback control button, which displays the progress of the current
program. By clicking or dragging the slider of the progress bar, you can adjust the play progress of the current
program.
