* Public Address System Intelligent Public Address System
19
No.
Time
Power state
Prompt
tone
Descriptions
1
7
：
55
channel 1√
The amplifier is powered up.
2
8
：
00
channel 2
、
3
、
4 √
On duty
ring
On duty. Begin to provide programs for the office
building. Channel 3 and 4 are opened for standby use.
3
12
：
00
channel 2 □
Off duty
ring
Off duty. Stop providing programs for the office
building.
4
12
：
05
channel 1 □
The amplifier is closed; and channel 3 and 4 are still
opened for standby use.
5
13
：
55
channel 1√
The amplifier is powered up.
6
14
：
00
channel 2 √
On duty
ring
On duty. Begin to provide programs for the office
building.
7
16
：
00
channel 2 □
Off duty
ring
Off duty. Stop providing programs for the office
building.
8
16
：
05
channel 1, 3, 4 □
All power supplies are closed (the host power supply
is not restricted by the program, so it is still waiting).
√
open;
□
close
4
—
6.2
Click “timing point” button to enter the timing setting interface. During the operation, please notice the
prompts of the “track operation wizard”.
4
—
6.3
Then, week options will appear on the left side of the screen, you should check the corresponding week.
For example, if today is Wednesday, you should click the dot on the left side of Wednesday.
4
—
6.4
Input the starting time by using the “hour, minute” plus or minus button on the lower left of the screen.
If you need to set the ending time of the program, you should first check it in the selection box of ending
time, and use the “hour, minute” button at the lower middle to set the ending time. Click and select the
program button, then you can select the DSPPA programs and inner CD programs needing to play. If
power timing is needed, please select the external power channel, and check the power that should be
connected at the current time point in the selection box of power channel at the lower middle of the
screen, then click the right end of the “prompt tone” box at the lower right of the screen, and pull out the
prompt tone (hourly chime) list, then click the needed prompt tone (including “mute”). When clicking a
prompt tone, the monitor speaker will give out this tone for reference, if it is not suitable, you can click
again, and the finally clicked one will prevail. So far, a time point has been set.
Click “add” button again to enter another row of the timetable, and use the same method to set another
timing point.
4
—
6.5
During the above operations, if it is input incorrectly, you can click “delete” button to remove it (the
whole row). Additionally, during the operation, it is not required to sort the time at each row by
sequences, so that the programmer can supplement omissions at any time, or add time occurred to
him/her temporarily.
4
—
6.6
After a day’s time is programmed, you can click “save scheme” button to save it.
If the timetables of several days in a week are the same, then you can click “copy” button to copy it. the
如果一个
upper of the copy interface shows the copy source (source files used to copy). Take the above text as an example,
the copy source is Wednesday (see 4-6.3), so you should click the “Wednesday” button at the row. The lower of
the copy interface shows the copy objective. We know that the organization implements a five-day work system,
and the work and rest time from Monday to Friday are the same, so you should click Monday, Tuesday, Thursday
and Friday buttons at the row, and click “copy” button, then the original contents in the objective will be saved,
and the system will automatically switch the interface to the timing setting interface. Then a week’s power
program timing program is established.
4
—
6.7
If the system has a suitable power program timing program before, then it can be used directly. You only
