A
NTI
-M
ODE
8033
CINEMA
/ 8033S-II
The filter selection mode is activated as follows.
Activate bypass mode by pressing the BYPASS button.
1. Keep the LIFT button pressed until the power LED starts to flash, indicating filter selection
mode.
2. A quick press of the LIFT button selects between the neutral mode and one of the 7 filter
modes. The selected filter is immediately activated.
3. Keep the LIFT button pressed to save the filter selection. A short beep is heard after
settings are saved and the filter selection mode has ended. Release the LIFT button.
4. Quickly pressing the BYPASS button in filter select mode returns the unit to normal mode,
with the selected filter and bypass mode activated. If you now press and hold the LIFT
button, the lift and filter setting will be saved.
Rev. 2.0
18.06.2012
Page 15 (20)
