14
Connecting Power Source
Connect power, using one of the methods listed below.
Caution
Verity that the terminal battery is installed prior to connection. If the battery is not properly installed and the wall charger is connected, the terminal
may power off and on continuously, preventing proper operation.
Note
Failure to unplug the wall charger before you remove the battery, can cause damage to the terminal
To use mini USB Travel Charger
1.
Plug the flat end of the mini USB Travel Charger into the Power interface connector and the other end into
standard AC wall outlet
2.
When charging is finished, remove the flat end from the interface connector jack on the terminal
To use Cradle
1.
Plug the AC power cord into cradle and plug the other end into a wall outlet.
2.
Slide the cradle switch to Charge mode
Cradle Front View
Cradle Back View
Slide switch
:
Slide the switch to choose charge or data sync mode
USB Port, Adapter Port, Spare battery Slot,
RS232 Port (not available)
