22
•
Appendix
ACQ16 USB Installation Manual
Pollution Degree
Pollution Degree2, equipment shall be
stored or operated where no conductive
pollution occurs
Installation Category
Category 2, designed and tested to withstand
limited over voltages
Accessories / Replacement Parts
Hospital grade power cable with NEMA 5-15P plug cap (P02198) (supplied)
For North America 230V, a NEMA 6-15P plug cap may be required.
USB 2.0 Cable, 2 meters long (P02124-2) (supplied)
Input Cables J02936 (Ch1 - 8)
Input Cables J02937 (Ch9 - 16)
Note: Replace cables when subjected to deterioration or abuse
Troubleshooting
If the system displays the following message on startup,
Acquisition Unit Not
Found
, then verify the following:
1.
The Acquisition Interface is powered up, and the USB cable is
connected to the personal computer.
2.
Windows device driver needs to be functional. Check the device
through the Hardware Devices menu.
Interface Configuration
The configuration of the application interface is done within P3 Plus. Select
Application Configuration
from the
Options
menu and select the
Acquisition
Interface
tab.
Below is an example of the
Application Configuration
dialog.
