XH9950 – DSE Wireless ADSL Router 802.11g 4 port
27
5.5 Advanced Setup
The Advanced setup allows you to change your firewall, Routing, NAT, QoS, VLAN
and ADSL settings, the following few sections will provide details on settings
available under this menu.
5.5.1 Firewall
•
Firewall:
o
Firewall:
Selecting this option can automatically detect and block
Denial of Service (DoS) attacks, such as Ping of Death, SYN Flood,
Port Scan and Land Attack.
o
SPI:
Enabling SPI will block all traffic initiated from WAN; this includes
DMZ, Virtual server and ACL WAN side.
5.5.2 Routing
•
Routing Table List:
Selecting this Option will list the current routing table
information. You can also edit this table using the ADD ROUTE button.
o
Static Route:
Select this option to set static Routing information.
Destination IP Address:
This parameter specifies the IP
network address of the final destination.
IP Subnet Mask:
Enter the destination subnet mask.
Gateway IP Address:
Enter the IP address of the gateway. The
gateway is an immediate neighbour of your ADSL Router that
will forward the packet to the destination through the WAN
interface.