XH9950 – DSE Wireless ADSL Router 802.11g 4 port
11
3.4.2 Option 2: Have an ADSL splitter professionally installed
•
Contact Telecom on 123 to arrange for a technician to be sent out to install
a central splitter.
3.5 Connecting the ADSL modem to your PC
1. Plug the provided 12v power adaptor into the connector labelled as POWER
on the rear panel.
2. Plug one end of the provided Ethernet cable into one of the four LAN
connectors on the rear of the router and the other end into a Network/Ethernet
card on your desktop/laptop computer.
3. Finally plug the RJ11 end of the provided phone cable into the LINE
connector (as shown above) and plug the other end either into your filter
directly or through the provided BT adaptor into your phone line. Press the
SW button located on the rear of the router to turn your router ON.
NOTE:
You can also setup/use the router without any LAN cables provided you have
a wireless network card installed on your computer/laptop. This is possible as the
wireless LAN is enabled by default with no security on your router.