USER MANUAL
SPEED DOME CAMERA SD-Dxxx Series II
Page:
13
Page:
13
WWW.DSE.EU
MENU OSD DoMEs
In the camera setup menu, you can set all
the operating parameters of the
camera and its movement.
The access to the menu is not required for normal operation of the dome as the main control
functions and setting can be operated via the system presets as just described. In the OSD
are however additional controls.
Access to the Main OSD
To access the OSD setup menu just call from the console:
PRESET 95 system.
Typically, you must first
select all
the address of
camera
that
Yes
want
program, then type 95 and then press CALL or PREVIEW or GO TO (refer to the manual of
the console on how to recall a preset)
To move within the general OSD menu using the joystick or navigation arrows.
To select a menu item or exit using the IRIS + button (ENTER) and IRIS - (EXIT)
Access to the OSD menu of the camera
module only
In the OSD menu, the CAMERA section is a submenu reserved for settings of one module
SONY camera where action is taken to change the parameters inherent in the image. E 'can
directly access this area by calling:
System PRESET 70
To move around the OSD menu of the camera module just do not use the
joystick or arrows
shift. You move between the items with ZOOM
+ / ZOOM - and you change the values of individual entries with FOCUS + / FOCUS -
