USER MANUAL
SPEED DOME CAMERA SD-A27IR
Page:
28
Page:
28
DSE srl - Italy - WWW.DSE.EU
This section allows programming of automatic actions that the camera can carry out on the
basis of the time and day of the week.
•
CLOCK NUMBER
- The
number
of the
programming. You can set up to three time slots
•
START TIME - Start time of the time slot
•
CLOSE TIME - End Time Time Zone
•
CLOCK ACTION - The action to be performed during the set time slot. Are available
the
following options:
•
NO ACTION - No function
•
CALL PRESET 1 ... 8 - Recalls a preset
•
START PATROL 1 or 2 - Call a patrol
•
LINEAR SCAN START 1 or 2 - Start the horizontal scan between 2 presets
•
START AUTO SCAN 1 or 5 - Start the automatic scan 360 ° (pan) at speeds
of 1 to 5
•
START PATTERN 1 or 2 - Start the path (sequence of movements) pre-stored
user
•
START AUTO TRACKING - Not available on this model
•
September SCHEDULE - lets you choose which days of the week to enable this
function. Care should be taken not to overlap time slots and not programmed bands
that pass 00:00.
The programmer allows the camera to perform operations
on the base of
calendar so
automatic. The automatic operation is stopped in case of manual control. If at the end of the
manual operations the timeslot is still active the automatic action resumes.
Zone
E 'possible to identify within the 360 ° of horizontal rotation of the camera of the limited
zones. When the camera will enter within the zone will appear on the screen of the same
name (if enabled in the display options)