USER MANUAL
SPEED DOME CAMERA SD-A27IR
Page:
13
Page:
13
DSE srl - Italy - WWW.DSE.EU
System PRESET
Not all of the 255 stored presets are available for user customization; some are used by the camera for specific functionality and are denominated SYSTEM PRESET.
This camera allows the user to use as desired presets from 1 to 48 and from 100 to 255 while they are reserved for system functions the
presets 49-99.
This camera allows the user to use as desired presets from 1 to 48 and from 100 to 255 while they are reserved for system functions the
presets 49-99.
The system Preset allow access to the configuration of the camera and to impart quickly the main controls. The complete programming of the functions, however, is always carried out in the camera
setup menu that is Mr. Fox next chapter and which also includes a detailed explanation of the individual functions summarized in this table.
The system presets have different function depending on whether you press the button RECALL PRESET (typically CALL or PREVIEW on the keyboard) or the SET PRESET button (typically SET or
PRESET on the keyboard). Consult your keyboard user guide to identify which buttons correspond to these commands.
Note that some system presets provide for the recall of two presets in sequence. They are marked with
the asterisk (*)
and explained in detail in the next description. The second preset must be called within a maximum time of 15 seconds. For example to set the residence time in seconds d PATROL
the asterisk (*)
and explained in detail in the next description. The second preset must be called within a maximum time of 15 seconds. For example to set the residence time in seconds d PATROL
press 1: 51 + SET
+ 3 + CALL.
Some system presets particularly critical features are not active without first enabled mode
USERS
with the preset 72. This in order to prevent accidental activations of inexperienced personnel. These presets are indicated in the table with an asterisk (
§).
USERS
with the preset 72. This in order to prevent accidental activations of inexperienced personnel. These presets are indicated in the table with an asterisk (
§).
USERS
with the preset 72. This in order to prevent accidental activations of inexperienced personnel. These presets are indicated in the table with an asterisk (
§).
PRESET
FEATURE ON RECALL PRESET (CALL)
FEATURE ON SET PRESET (SET)
FURTHER INFORMATION
49
Operation of the IR LEDs (*)
Call preset 49 and then the desired preset chosen in the IR table below
50
Start PATTERN 1
Set PATTERN 1
A PATTERN is a sequence of movements prestored callable at any time.
With "set PATTERN" (SET preset 50) enters the configuration program of
PATTERN 1. Perform the sequence of movements that you want to store
and press IRIS OPEN to finish. Recalling the preset 50 starts the stored
sequence.
51
Start PATROL 1 (SCAN 1)
Set time permanence PATROL 1 (*)
As PATROL means the sequential display of more preset with a certain
residence time on each one. Richiamanado the Preset system 51 starts the
patrol 1 among the presets from 1 to 16. By setting the same preset 51
instead defines the time spent on each preset. For scegeliere time call
within 15 seconds, the preset that corresponds to the desired time in the
TIMES table that follows.
52
Start PATROL 2 (2 SCAN)
Set time permanence PATROL 2 (*)
As above for PATROL 2 among the preset 17 to 32
53
Start PATROL 3 (SCAN 3)
Set time permanence PATROL 3 (*)
As above for PATROL 3 among the preset 33 to 48
61
Disable text overlay
Enable text overlay
The text overlay in the image that can be enabled or less includes: the
angle data and direction, the zoom level and the preset number recalled
62
Disable reduction at high zoom speed
Enables reduction to strong zoom speed
This function is the one that automatically reduces the speed of the tilting
movement in proportion to the level of