manualshive.com logo in svg

DSE NAKED RL Series, Installation Manual, Page: 6 / 57

Share
Download
DSE NAKED RL Series Installation Manual Download Page 6

INSTALLATION MANUAL

IP CAMERAS SPEED DOME SERIES RL 

Page:

 6   

Page:

 6   

DSE SRL - ITALY - WWW.DSE.EU 

no movement occurs on the power. If you're using one poe switch, may not support POE + IEEE802.3at to 30W, but just the normal 

POE IEEE802.3af.

After connecting the network cable to the switch verifies that the LEDs of the switches that correspond to the port that is used to start 

flashing. If verification remain off the network cable.

SD CARD  

Some cameras have an internal SD card slot which can be accessed by removing the camera cover. You can insert an SD card up to 

128GB to record board room.

MOUNTING THE CAMERA 

The cameras are to be fixed to the wall with the supplied mounting bracket. The connecting cord extends through the bracket.

The camera housing is watertight and can be exposed to rain. The connections must be protected from the 

weather.  

The cable entry may be provided at the center of the bracket if the cable passage is walled. Alternatively, a lateral conduit entrance is 

provided in the base of the bracket.

Summary of Contents for NAKED RL Series


























































Reviews:

No comments