DSE NAKED RL Series, Installation Manual, Page: 27 / 57

INSTALLATION MANUAL
IP CAMERAS SPEED DOME SERIES RL
Page: 27 Page: 27
DSE SRL - ITALY - WWW.DSE.EU
If we use for viewing the cameras internal PC to the network, the addresses of the cameras (usually the 192.168.XXX.XXX type) are
directly accessible. If you wish to connect via the Internet using a PC placed elsewhere, the internal network addresses will no longer
be reached directly, because the only IP address visible from the web will be what our router will by its WAN side that is towards the
Internet outside world.
This address is assigned by the provider (ISP). And 'advisable to get from the provider a fixed address each time you connect. If there
is a chance you need to use DDNS services (see configuration manual).
It is not sufficient, however, type in the browser the IP address of the WAN side Router to connect to the cameras. The router acts as a
filter and drops every external call that a call from within the network is not paid before. In order to connect the cameras it is therefore
necessary to insert inside the router ports of directing instructions which, depending on the router manufacturers are called NAT, PORT
FORWARDING, PORT MAPPING etc.
In practice, access the router configuration and insert instructions so that this direct calls coming from outside, to the inside IP address
of the cameras. Obviously the directing is only performed for the communication ports that are used by the cameras and that will be
detailed below.
The communication ports used by the factory RL Series cameras are as follows:
•
HTTP PORT: Default 80. The cameras use this port to communicate with browsers like IE. Browsers such as Internet Explorer use HTTP PORT: Default 80. The cameras use this port to communicate with browsers like IE. Browsers such as Internet Explorer use
the factory port 80 for communication. For example, if we type in the browser address bar: http://212.12.34.201 will be called the IP
address 212.12.34.201 on port 80. If in the configuration of the camera is set to a different HTTP port (eg. 81, 82 etc. ) needs to be
clarified in the browser which port to use for the call after pointing the address with ":" to separate it. If, for example.
http://212.12.34.201:81 we type will be called the IP address 212.12.34.201 port 81.
•
VIDEO PORT: Default 90. E 'used by the camera for sending video VIDEO PORT: Default 90. E 'used by the camera for sending video