manualshive.com logo in svg

DSE NAKED RL Series, Installation Manual, Page: 44 / 57

Share
Download
DSE NAKED RL Series Installation Manual Download Page 44

INSTALLATION MANUAL

IP CAMERAS SPEED DOME SERIES RL 

Page:

 44   

Page:

 44   

DSE SRL - ITALY - WWW.DSE.EU 

DDNS (Dynamic DNS) that allow you to constantly monitor the machine's IP address. These services, also available for free, provide 

the user with a domain name that you type into your browser. The DDNS provider redirects communication to the IP address that the 

camera has at that moment.  

The RL Series cameras support the most common DDNS services and are able to send to the DDNS provider periodically Internet IP 

address assigned to them.  

E 'can set the provider address the port and authentication. 

Using mobile apps and cloud included with the camera is not necessary to use DDNS services. 

P2P

 - In this section there are signs for the P2P service in the cloud server that allows access from phone without static IP and router 

P2P

 - In this section there are signs for the P2P service in the cloud server that allows access from phone without static IP and router 

configuration. It 'been described how to use these functions in the section relating to APP.

PROTOCOL

 - In this section you can enable / disable use of the ONVIF protocol and some private protocols from other manufacturers. 

PROTOCOL

 - In this section you can enable / disable use of the ONVIF protocol and some private protocols from other manufacturers. 

Summary of Contents for NAKED RL Series


























































Reviews:

No comments