Specifications
12
3.3 COMMUNICATION PORT USAGE
Communication
Specification
USB Port
(DSE9400 series
only)
USB2.0 Device for connection to PC running DSE Configuration Suite
Max distance 6m (20 feet)
RS485 Serial
Port
(DSE9400 series
only)
Isolated
Data connection 2 wire + common
Half Duplex
Data direction control for Transmit (by s/w protocol)
Max Baud Rate 19200
External termination required (120
Ω
)
Max common mode offset 70V (on board protection transorb)
Max distance 1.2km (¾ mile)
3.3.1 USB CONNECTION
The USB port is provided to give a simple means of connection between a PC and the DSE9400
series battery charger. Using the DSE Configuration Suite Software, the operator is then configure
and monitor the state of the battery charger.
To connect a DSE9400 series battery charger to a PC by USB, the following items are required:
•
DSE9400 series battery charger
•
DSE Configuration Suite Software
(Supplied on configuration suite software CD or available from
www.deepseaplc.com).
•
USB cable Type A to Type B.
(This is the same cable as often used between a PC and a USB
printer)
DSE can supply this cable if required :
PC Configuration interface lead (USB type A – type B) DSE Part
No 016-125
NOTE: - Refer to DSE9400 Series Battery Charger PC Software Configuration Manual for
further details on configuring and monitoring.