background image

INSTALLATION MANUAL

DS-N4 - HD-SDI Video 

Page:

 37   

Page:

 37   

DSE SRL - ITALY - WWW.DSE.EU 

SERIAL WINDOW 

CH -

 Enables the control of the cameras that support the PTZ control 

CH -

 Enables the control of the cameras that support the PTZ control 

ADDRESS -

 The camera address that identifies it on the bus (1-255) 

ADDRESS -

 The camera address that identifies it on the bus (1-255) 

BAUD RATE -

 The communication speed must be the same for all cameras and command organs. The DVR supports many 

BAUD RATE -

 The communication speed must be the same for all cameras and command organs. The DVR supports many 

communication speed of which the most common cameras are supported by 2400,4800,9600 Baud.

PROTOCOL -

 And 'the communication language to be used which must obviously be supported by the cameras. For speed dome cameras 

PROTOCOL -

 And 'the communication language to be used which must obviously be supported by the cameras. For speed dome cameras 

DSE use Pelco D Protocol The DVR supports the following communication standards from other manufacturers: HY, Panasonic, Pelco 

9750, Pelco D / P, Philips, Samsung, Sharp, Sony, Yaan.

ADVANCED WINDOW 

In this window, if the function is supported by the camera, you can set Major 

Summary of Contents for DS-N4



















































































Reviews: