INSTALLATION MANUAL
DM-WFC2 / 3 WFL1 - WIFI REMOTE CONTROLS
Page:7
DSE SRL - ITALY - WWW.DSE.EU
Placement
When choosing the installation location of the product, pay attention to these precautions
CHECK THE WIFI COVERAGE
Before placing the remote control in its final position, remember that this device must connect
to your wifi network in order to function. You should therefore check with your mobile phone
that at the point where you want to put it there is a good coverage of your wifi network. If you
see that the signal is very poor you should intervene on your wifi network, perhaps enhancing
it with a repeater.
Do not install the product in an area with poor wifi signal because then it would be unreliable
in its operation.
NO METAL CONTAINERS
Be careful not to close the remote control card in a metal container because this would shield
the wifi signal. On the other hand, you can close the plastic cover of the junction box without
any problems because it does not provide an important shield.