INSTALLATION MANUAL
DM-WFC2 / 3 WFL1 - WIFI REMOTE CONTROLS
Page:5
DSE SRL - ITALY - WWW.DSE.EU
Electrical connection
DM-WFC3
DM-WFC3 is a remote control for electric locks, gate openers or garage doors. It provides an
impulsive contact that activates the device and also a status contact that you can optionally
connect to signal to the remote control if the door is open or closed. You can use this remote
control for all devices that require an impulsive command instead of an ON / OFF switch.
LN = Connect the 110-250V AC power supply
S1-S2 = Connects the electric lock or gate opener command (NO contact closes for 2 seconds
with each command)
S3-S4 = Connect a contact that closes when the door is closed
Terminals S1-S2 provide a 3 second pulse each time a remote command is performed. If you
have other local buttons to control the door or gate, you can connect them in parallel on the
same control terminals. If your drive (electric lock, garage door etc.) has a contact that closes
when the door is closed you can connect this contact to the S3-S4 inputs, so our app will be
able to tell you for sure if the door is open or closed.
The two terminals separated from the main terminal block are not used.