background image

24

IMPORTANT - READ CAREFULLY: DSC Software purchased with or without Products and Components 

is copyrighted and is purchased under the following license terms:

• This End-User License Agreement (“EULA”) is a legal agreement between You (the company, individual or 

entity who acquired the Software and any related Hardware) and Digital Security Controls, a division of Tyco 

Safety Products Canada Ltd. (“DSC”), the manufacturer of the integrated security systems and the developer of 

the software and any related products or components (“HARDWARE”) which You acquired.  

• If the DSC software product (“SOFTWARE PRODUCT” or “SOFTWARE”) is intended to be accompanied by 

HARDWARE, and is NOT accompanied by new HARDWARE, You may not use, copy or install the SOFT-

WARE PRODUCT.   The SOFTWARE PRODUCT includes computer software, and may include associated 

media, printed materials, and “online” or electronic documentation.  

• Any software provided along with the Software Product that is associated with a separate end-user license agree-

ment is licensed to You under the terms of that license agreement.  

• By installing, copying, downloading, storing, accessing or otherwise using the Software Product, You agree 

unconditionally to be bound by the terms of this EULA, even if this EULA is deemed to be a modification of any 

previous arrangement or contract.  If You do not agree to the terms of this EULA, DSC is unwilling to license the 

Software Product to You, and You have no right to use it.

SOFTWARE PRODUCT LICENSE

The SOFTWARE PRODUCT is protected by copyright laws and international copyright treaties, as well as other 

intellectual property laws and treaties. The SOFTWARE PRODUCT is licensed, not sold. 

1.  GRANT OF LICENSE 

 

This EULA grants You the following rights:

(a)Software Installation and Use - For each license You acquire, You may have only one copy of the SOFTWARE 

PRODUCT installed. 

(b)Storage/Network Use - The SOFTWARE PRODUCT may not be installed, accessed, displayed, run, shared or 

used concurrently on or from different computers, including a workstation, terminal or other digital electronic 

device (“Device”). In other words, if You have several workstations, You will have to acquire a license for each 

workstation where the SOFTWARE will be used.

(c)Backup Copy - You may make back-up copies of the SOFTWARE PRODUCT, but You may only have one copy 

per license installed at any given time. You may use the back-up copy solely for archival purposes.  Except as 

expressly provided in this EULA, You may not otherwise make copies of the SOFTWARE PRODUCT, 

including the printed materials accompanying the SOFTWARE.

2.   DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS 

(a)Limitations on Reverse Engineering, Decompilation and Disassembly - You may not reverse engineer, 

decompile, or disassemble the SOFTWARE PRODUCT, except and only to the extent that such activity is 

expressly permitted by applicable law notwithstanding this limitation. You may not make any changes or 

modifications to the Software, without the written permission of an officer of DSC. You may not remove any 

proprietary notices, marks or labels from the Software Product. You shall institute reasonable measures to ensure 

compliance with the terms and conditions of this EULA.

(b)Separation of Components - The Software Product is licensed as a single product. Its component parts may not 

be separated for use on more than one HARDWARE unit.

(c)Single INTEGRATED PRODUCT - If You acquired this SOFTWARE with HARDWARE, then the 

SOFTWARE PRODUCT is licensed with the HARDWARE as a single integrated product. In this case, the 

SOFTWARE PRODUCT may only be used with the HARDWARE as set forth in this EULA.

(d)Rental - You may not rent, lease or lend the SOFTWARE PRODUCT. You may not make it available to others 

or post it on a server or web site.

(e)Software Product Transfer - You may transfer all of Your rights under this EULA only as part of a permanent 

sale or transfer of the HARDWARE, provided You retain no copies, You transfer all of the SOFTWARE 

PRODUCT (including all component parts, the media and printed materials, any upgrades and this EULA), and 

provided the recipient agrees to the terms of this EULA. If the SOFTWARE PRODUCT is an upgrade, any 

transfer must also include all prior versions of the SOFTWARE PRODUCT.

(f)Termination - Without prejudice to any other rights, DSC may terminate this EULA if You fail to comply with 

the terms and conditions of this EULA. In such event, You must destroy all copies of the SOFTWARE 

PRODUCT and all of its component parts.

(g)Trademarks - This EULA does not grant You any rights in connection with any trademarks or service marks of 

DSC or its suppliers.

3. COPYRIGHT

 - All title and intellectual property rights in and to the SOFTWARE PRODUCT (including but 

not limited to any images, photographs, and text incorporated into the SOFTWARE PRODUCT), the 

accompanying printed materials, and any copies of the SOFTWARE PRODUCT, are owned by DSC or its 

suppliers. You may not copy the printed materials accompanying the SOFTWARE PRODUCT. All title and 

intellectual property rights in and to the content which may be accessed through use of the SOFTWARE 

PRODUCT are the property of the respective content owner and may be protected by applicable copyright or other 

intellectual property laws and treaties. This EULA grants You no rights to use such content. All rights not expressly 

granted under this EULA are reserved by DSC and its suppliers.

4.  EXPORT RESTRICTIONS

 - You agree that You will not export or re-export the SOFTWARE PRODUCT to 

any country, person, or entity subject to Canadian export restrictions. 

5.   CHOICE OF LAW

 - This Software License Agreement is governed by the laws of the Province of Ontario, 

Canada.

6.   ARBITRATION

 - All disputes arising in connection with this Agreement shall be determined by final and 

binding arbitration in accordance with the Arbitration Act, and the parties agree to be bound by the arbitrator’s 

decision.  The place of arbitration shall be Toronto, Canada, and the language of the arbitration shall be English.

7.  LIMITED WARRANTY

(a) NO WARRANTY - DSC PROVIDES THE SOFTWARE “AS IS” WITHOUT WARRANTY. DSC DOES 

NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR REQUIREMENTS OR THAT OPERATION 

OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE.

(b) CHANGES IN OPERATING ENVIRONMENT - DSC shall not be responsible for problems caused by changes 

in the operating characteristics of the HARDWARE, or for problems in the interaction of the SOFTWARE 

PRODUCT with non-DSC-SOFTWARE or HARDWARE PRODUCTS.

Summary of Contents for WTK5504





























Reviews: