DSC WTK5504 User Manual Download Page 17

Page: 17 / 28

Alarms

When Alarm Sounds

The system can generate 3 different alarm sounds:

• Temporal/pulsed siren = Fire Alarm
• 4 beeps, 5-second pause, 4 beeps = Carbon Monoxide Alarm
• Continuous siren = Intrusion (Burglary Alarm)

NOTE: The priority of signals is fire alarm, carbon monoxide alarm then burglary alarm.

Fire Alarm Pulsed Siren

Follow your emergency evacuation plan immediately!

If the fire alarm was accidental (e.g., burned toast, bathroom steam, etc.), enter your access code to

silence the alarm. Call your central station to avoid a dispatch.

Wireless Carbon Monoxide Alarm

Activation of your CO alarm indicates the presence of carbon monoxide (CO), which can be fatal.

During an alarm, the red LED on the CO detector flashes rapidly and the buzzer sounds with a repeating

cadence of: 4 quick beeps, 5-second pause, 4 quick beeps.

Also during an alarm, the siren connected to

the control panel produces a repeating cadence of 4 quick beeps, 5-second pause, 4 quick beeps. The

keypad will also provide audible and visual indication of the CO alarm.
If an alarm sounds:
1. Operate silence button.
2. Call emergency services or your fire department.
3. Immediately move outdoors or to an open door/window.

Phone Trouble

The system has detected that the telephone line

is disconnected.

Call for service

Communication

Failure

The system attempted to communicate with the

monitoring station, but failed. This may be due to

Telephone Line Fault.

Call for service

Device Fault

• Zones
• Sirens (Impassa SCW9055/57)
• Keypads (Impassa SCW9055/57)
• Repeaters

Call for service

Device Tamper

• Zones
• Sirens (Impassa SCW9055/57)
• Keypads (Impassa SCW9055/57)
• Repeaters

Call for service

Device Low

Battery

• Zones
• Fobs
• Sirens
• Keypads
• Prox tags
• Repeaters

Call for service

Time and Date

Trouble

If complete power was lost (AC and Battery), the

time and date need to be reprogrammed.

Reprogram time &

date

Alternate

Communicator

Trouble

• SIM Lock
• GSM
• Ethernet
• Receiver
• Supervision
• Config SMS

Call for service.

For Ethernet

trouble, check LAN

connections.

Troubles

Comments/Further Options

Action

Summary of Contents for WTK5504





























Search results

Summary of Contents for WTK5504

Reviews:

Related manuals for WTK5504

Brands by name

Popular brands

DSC WTK5504, User Manual

Search results

Summary of Contents for WTK5504

Reviews:

Related manuals for WTK5504

Brands by name

Popular brands