background image

The smoke alarm WS4916 has a recommended service life of 10
years under normal conditions of use. Please refer to the label
applied to the device indicating the recommended replacement
year.
For servicing the unit or replacement batteries please call your
installation company that provided you with the alarm system.

NOTE:

In Australia the device shall not be installed in locations

where the normal ambient temperature is lower than 41°F (5°C)
or higher than 113°F (45°C).

This manual shall be used in conjunction with the Installation
Manual of the alarm control panel. All the instructions specified
within that manual must be observed.

Limited Warranty

Digital Security Controls warrants that for a period of twelve months from the date of purchase, the prod-

uct shall be free of defects in materials and workmanship under normal use and that in fulfillment of any

breach of such warranty, Digital Security Controls shall, at its option, repair or replace the defective equip-

ment upon return of the equipment to its repair depot. This warranty applies only to defects in parts and

workmanship and not to damage incurred in shipping or handling, or damage due to causes beyond the

control of Digital Security Controls such as lightning, excessive voltage, mechanical shock, water dam-

age, or damage arising out of abuse, alteration or improper application of the equipment. 
The foregoing warranty shall apply only to the original buyer, and is and shall be in lieu of any and all

other warranties, whether expressed or implied and of all other obligations or liabilities on the part of Dig-

ital Security Controls. Digital Security Controls neither assumes responsibility nor authorizes any other

person purporting to act on its behalf to modify or to change this warranty, nor to assume for it any other

warranty or liability concerning this product. 
In no event shall Digital Security Controls be liable for any direct, indirect or consequential damages, loss

of anticipated profits, loss of time or any other losses incurred by the buyer in connection with the pur-

chase, installation or operation or failure of this product. 

Smoke Detectors: 

Smoke detectors that are a part of this system may not properly alert occupants of a

fire for a number of reasons, some of which follow. The smoke detectors may have been improperly

installed or positioned. Smoke may not be able to reach the smoke detectors, such as when the fire is in a

chimney, walls or roofs, or on the other side of closed doors. Smoke detectors may not detect smoke from

fires on another level of the residence or building.
Every fire is different in the amount of smoke produced and the rate of burning. Smoke detectors cannot

sense all types of fires equally well. Smoke detectors may not provide timely warning of fires caused by

carelessness or safety hazards such as smoking in bed, violent explosions, escaping gas, improper storage

of flammable materials, overloaded electrical circuits, children playing with matches or arson.
Even if the smoke detector operates as intended, there may be circumstances when there is insufficient

warning to allow all occupants to escape in time to avoid injury or death.

Warning: Digital Security Controls recommends that the entire system be completely tested on a regular

basis. However, despite frequent testing, and due to, but not limited to, criminal tampering or electrical

disruption, it is possible for this product to fail to perform as expected.
Important Information: Changes or modifications not expressly approved by Digital Security Controls

could void the user’s authority to operate this equipment.

FCC Compliance Statement

CAUTION: Changes or modifications not expressly approved by DSC could void your authority to use

this equipment.

This equipment generates and uses radio frequency energy and if not installed and used properly, in strict

accordance with the manufacturer’s instructions, may cause interference to radio and television reception.

It has been type tested and found to comply with the limits for Class B device in accordance with the spec-

ifications in Subpart “B” of Part 15 of FCC Rules, which are designed to provide reasonable protection

against such interference in any residential installation. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause interference to television or radio

reception, which can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:
• Re-orient the receiving antenna
• Relocate the alarm control with respect to the receiver
• Move the alarm control away from the receiver
• Connect the alarm control into a different outlet so that alarm control and receiver are on different cir-

cuits.

If necessary, the user should consult the dealer or an experienced radio/television technician for additional

suggestions. The user may find the following booklet prepared by the FCC helpful: “How to Identify and

Resolve Radio/Television Interference Problems”. This booklet is available from the U.S. Government

Printing Office, Washington, D.C. 20402, Stock # 004-000-00345-4.
Industry Canada Compliance Statement: This Class B digital apparatus meets all requirements of the

Canadian interference-causing equipment regulations.
Cet appareil numérique de la Classe B respecte toutes les exigences de règlement sur le matériel brouilleur

du Canada.
IC:160A - WLS916NB
The term "IC:" before the radio certification number only signifies that Industry Canada technical specifi-

cations were met.

IMPORTANT - READ CAREFULLY: DSC Software purchased with or without Products and

Components is copyrighted and is purchased under the following license terms:

• This End-User License Agreement (“EULA”) is a legal agreement between You (the company, individ-

ual or entity who acquired the Software and any related Hardware) and Digital Security Controls, a divi-

sion of Tyco Safety Products Canada Ltd. (“DSC”), the manufacturer of the integrated security systems

and the developer of the software and any related products or components (“HARDWARE”) which

You acquired.  

• If the DSC software product (“SOFTWARE PRODUCT” or “SOFTWARE”) is intended to be accom-

panied by HARDWARE, and is NOT accompanied by new HARDWARE, You may not use, copy or

install the SOFTWARE PRODUCT.  The SOFTWARE PRODUCT includes computer software, and

may include associated media, printed materials, and “online” or electronic documentation.  

• Any software provided along with the SOFTWARE PRODUCT that is associated with a separate

end-user license agreement is licensed to You under the terms of that license agreement.  

• By installing, copying, downloading, storing, accessing or otherwise using the SOFTWARE PROD-

UCT, You agree unconditionally to be bound by the terms of this EULA, even if this EULA is deemed

to be a modification of any previous arrangement or contract.  If You do not agree to the terms of this

EULA, DSC is unwilling to license the SOFTWARE PRODUCT to You, and You have no right to use

it.

SOFTWARE PRODUCT LICENSE

The SOFTWARE PRODUCT is protected by copyright laws and international copyright treaties, as well

as other intellectual property laws and treaties. The SOFTWARE PRODUCT is licensed, not sold. 

1. GRANT OF LICENSE

  This EULA grants You the following rights:

(a)Software Installation and Use - For each license You acquire, You may have only one copy of the

SOFTWARE PRODUCT installed. 
(b)Storage/Network Use - The SOFTWARE PRODUCT may not be installed, accessed, displayed, run,

shared or used concurrently on or from different computers, including a workstation, terminal or other

digital electronic device (“Device”). In other words, if You have several workstations, You will have to

acquire a license for each workstation where the SOFTWARE will be used.
(c)Backup Copy 

 You may make back-up copies of the SOFTWARE PRODUCT, but You may only

have one copy per license installed at any given time. You may use the back-up copy solely for archival

purposes.  Except as expressly provided in this EULA, You may not otherwise make copies of the SOFT-

WARE PRODUCT, including the printed materials accompanying the SOFTWARE.

2.  DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS

 

(a)Limitations on Reverse Engineering, Decompilation and Disassembly - You may not reverse engineer,

decompile, or disassemble the SOFTWARE PRODUCT, except and only to the extent that such activity

is expressly permitted by applicable law notwithstanding this limitation.  You may not make any changes

or modifications to the Software, without the written permission of an officer of DSC. You may not

remove any proprietary notices, marks or labels from the Software Product. You shall institute reasonable

measures to ensure compliance with the terms and conditions of this EULA.
(b)Separation of Components 

 The SOFTWARE PRODUCT is licensed as a single product. Its compo-

nent parts may not be separated for use on more than one HARDWARE unit.
(c)Single INTEGRATED PRODUCT 

 If You acquired this SOFTWARE with HARDWARE, then the

SOFTWARE PRODUCT is licensed with the HARDWARE as a single integrated product. In this case,

the SOFTWARE PRODUCT may only be used with the HARDWARE as set forth in this EULA..
(d)Rental 

You may not rent, lease or lend the SOFTWARE PRODUCT. You may not make it available

to others or post it on a server or web site.
(e)Software Product Transfer - You may transfer all of Your rights under this EULA only as part of a per-

manent sale or transfer of the HARDWARE, provided You retain no copies, You transfer all of the

SOFTWARE PRODUCT (including all component parts, the media and printed materials, any upgrades

and this EULA), and provided the recipient agrees to the terms of this EULA. If the SOFTWARE PROD-

UCT is an upgrade, any transfer must also include all prior versions of the SOFTWARE PRODUCT.
(f) Termination - Without prejudice to any other rights, DSC may terminate this EULA if You fail to com-

ply with the terms and conditions of this EULA. In such event, You must destroy all copies of the SOFT-

WARE PRODUCT and all of its component parts.
(g)Trademarks - This EULA does not grant You any rights in connection with any trademarks or service

marks of DSC or its suppliers.

3. COPYRIGHT

 - All title and intellectual property rights in and to the SOFTWARE PRODUCT

(including but not limited to any images, photographs, and text incorporated into the SOFTWARE

PRODUCT), the accompanying printed materials, and any copies of the SOFTWARE PRODUCT, are

owned by DSC or its suppliers. You may not copy the printed materials accompanying the SOFTWARE

PRODUCT. All title and intellectual property rights in and to the content which may be accessed through

use of the SOFTWARE PRODUCT are the property of the respective content owner and may be pro-

tected by applicable copyright or other intellectual property laws and treaties. This EULA grants You no

rights to use such content. All rights not expressly granted under this EULA are reserved by DSC and its

suppliers.

4.   EXPORT RESTRICTIONS

 - You agree that You will not export or re-export the SOFTWARE

PRODUCT to any country, person, or entity subject to Canadian export restrictions. 

5.  CHOICE OF LAW

 -  This Software License Agreement is governed by the laws of the Province of

Ontario, Canada.

6.  ARBITRATION

 - All disputes arising in connection with this Agreement shall be determined by final

and binding arbitration in accordance with the Arbitration Act, and the parties agree to be bound by the

arbitrator’s decision.  The place of arbitration shall be Toronto, Canada, and the language of the arbitra-

tion shall be English.

7.  LIMITED WARRANTY

(a)  NO WARRANTY - DSC PROVIDES THE SOFTWARE “AS IS” WITHOUT WARRANTY. DSC

DOES NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR REQUIREMENTS OR

THAT OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE.
(b)  CHANGES IN OPERATING ENVIRONMENT

 - 

 DSC shall not be responsible for problems caused

by changes in the operating characteristics of the HARDWARE, or for problems in the interaction of the

SOFTWARE PRODUCT with non-DSC-SOFTWARE or HARDWARE PRODUCTS.
(c) LIMITATION OF LIABILITY; WARRANTY REFLECTS ALLOCATION OF RISK  - IN ANY

EVENT, IF ANY STATUTE IMPLIES WARRANTIES OR CONDITIONS NOT STATED IN THIS

LICENSE AGREEMENT, DSC’S ENTIRE LIABILITY UNDER ANY PROVISION OF THIS

LICENSE AGREEMENT SHALL BE LIMITED TO THE GREATER OF THE AMOUNT ACTU-

ALLY PAID BY YOU TO LICENSE THE SOFTWARE PRODUCT AND FIVE CANADIAN DOL-

LARS (CAD$5.00).  BECAUSE SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR

LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE

ABOVE LIMITATION MAY NOT APPLY TO YOU.

(d) DISCLAIMER OF WARRANTIES   - THIS WARRANTY CONTAINS THE ENTIRE WAR-

RANTY AND SHALL BE IN LIEU OF ANY AND ALL OTHER WARRANTIES, WHETHER

EXPRESSED OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABIL-

ITY OR FITNESS FOR A PARTICULAR PURPOSE) AND OF ALL OTHER OBLIGATIONS OR

LIABILITIES ON THE PART OF DSC.  DSC MAKES NO OTHER WARRANTIES. DSC NEITHER

ASSUMES NOR AUTHORIZES ANY OTHER PERSON PURPORTING TO ACT ON ITS BEHALF

TO MODIFY OR TO CHANGE THIS WARRANTY, NOR TO ASSUME FOR IT ANY OTHER

WARRANTY OR LIABILITY CONCERNING THIS SOFTWARE PRODUCT.

(e)  EXCLUSIVE  REMEDY  AND  LIMITATION  OF  WARRANTY   -   UNDER  NO  CIRCUM-

STANCES SHALL DSC BE LIABLE FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR

INDIRECT DAMAGES BASED UPON BREACH OF WARRANTY, BREACH OF CONTRACT,

NEGLIGENCE, STRICT LIABILITY, OR ANY OTHER LEGAL THEORY. SUCH DAMAGES

INCLUDE, BUT ARE NOT LIMITED TO, LOSS OF PROFITS, LOSS OF THE SOFTWARE PROD-

UCT OR ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF SUBSTITUTE OR

REPLACEMENT EQUIPMENT, FACILITIES OR SERVICES, DOWN TIME, PURCHASERS

TIME, THE CLAIMS OF THIRD PARTIES, INCLUDING CUSTOMERS, AND INJURY TO PROP-

ERTY.  WARNING

:

 

DSC recommends that the entire system be completely tested on a regular basis. However, despite fre-

quent testing, and due to, but not limited to, criminal tampering or electrical disruption, it is possible for

this SOFTWARE PRODUCT to fail to perform as expected.

+HUHE\ '6& GHFODUHV WKDW WKLV GHYLFH LV LQ FRPSOLDQFH ZLWK WKH HVVHQWLDO

UHTXLUHPHQWVDQGRWKHUUHOHYDQWSURYLVLRQVRI'LUHFWLYH(&

7KH FRPSOHWH 5 77( 'HFODUDWLRQ RI &RQIRUPLW\ FDQ EH IRXQG DW

KWWSZZZGVFFRPOLVWLQJVBLQGH[DVS[

&=( '6& MDNR Y¿UREFH SURKODģXMH ŀH WHQWR Y¿UREHN MH Y VRXODGX VH YģHPL

UHOHYDQWQ¯PLSRŀDGDYN\VPÝUQLFH(&

'$1'6&HUNO¨UHUKHUYHGDWGHQQHNRPSRQHQWHQRYHUKROGHUDOOHYLNWLJHNUDYVDPW

DQGUHEHVWHPPHOVHUJLWWLGLUHNWLY(&
'87+LHUELMYHUNODDUW'6&GDWGLWWRHVWHOLQRYHUHHQVWHPPLQJLVPHWGHHLVHQHQ

EHSDOLQJHQYDQULFKWOLMQ(&

),1'6&YDNXXWWDDODLWWHHQW¦\WW¦Y¦QGLUHNWLLYLQ(&ROHQQDLVHWYDDWLPXNVHW
)5( 3DU OD SU«VHQWH '6& G«FODUH TXH FH GLVSRVLWLI HVW FRQIRUPH DX[ H[LJHQFHV

HVVHQWLHOOHVHWDXWUHVVWLSXODWLRQVSHUWLQHQWHVGHOD'LUHFWLYH(&

*(5+LHUGXUFKHUNO¦UW'6&GD¡GLHVHV*HU¦WGHQHUIRUGHUOLFKHQ%HGLQJXQJHQXQG

9RUUDXVHW]XQJHQGHU5LFKWOLQLH(&HQWVSULFKW

*5(˂˜˞˱ˬ˲˭˞ˮ˹˪˱ˬ˯ˤ'6&ˡˤ˨˻˪ˢ˦˹˱˦˞˲˱˛ˤ˰˲˰˧ˢ˲˛ˢ˜˪˞˦˰˺˩˳˶˪ˤ˩ˢ˱˦˯

ˬ˲˰˦˻ˡˤ˯˞˭˞˦˱˛˰ˢ˦˯˧˞˦˩ˢ˹˨ˢ˯˱˦˯˙˨˨ˢ˯˰˴ˢ˱˦˧˚˯˞˪˞˳ˬˮ˚˯˱ˤ˯ˍˡˤˠ˜˞˯(&

,7$ &RQ OD SUHVHQWH OD 'LJLWDO 6HFXULW\ &RQWUROV GLFKLDUD FKH TXHVWR SURGRWWR ª

FRQIRUPH DL UHTXLVLWL HVVHQ]LDOL HG DOWUH GLVSRVL]LRQL ULOHYDQWL UHODWLYH DOOD 'LUHWWLYD

&(
125'6&HUNO¨UHUDWGHQQHHQKHWHQHULVDPVYDUPHGGHJUXQQOHJJHQGHNUDYRJ

ºYULJHUHOHYDQWHNUDYLGLUHNWLY()
32/'6&RĝZLDGF]DľHXU]ÇG]HQLHMHVWZ]JRGQRĝFL]]DVDGQLF]\PLZ\PDJDQLDPL

RUD]SR]RVWDĄ\PLVWRVRZQ\PLSRVWDQRZLHQLDPL'\UHNW\Z\:(
3253RUHVWHPHLRD'6&GHFODUDTXHHVWHHTXLSDPHQWRHVW£HPFRQIRUPLGDGH

FRP RV UHTXLVLWRV HVVHQFLDLV H RXWUDV GHWHUPLQD©·HV UHOHYDQWHV GD 'LUHFWLYD

(&

63$3RUODSUHVHQWH'6&GHFODUDTXHHVWHHTXLSRHVW£HQFRQIRUPLGDGFRQORV

UHTXLVLWRVHVHQFLDOHV\RWURVUHTXLVLWRVUHOHYDQWHVGHOD'LUHFWLYD(&

6:('6&EHNU¦IWDUK¦UPHGDWWGHQQDDSSDUDWXSSI\OOHUGHY¦VHQWOLJDNUDYHQRFK

DQGUDUHOHYDQWDEHVW¦PPHOVHUL'LUHNWLYHW(&

1134
DSC, Toronto, Canada
2010
1134-CPD-001

EN54-5/A1 (2002)
EN54-7/A2 (2006)
Point type smoke and heat detector

© 2011 Tyco International Ltd. and its Respective Companies. All Rights Reserved.
Tech Support: 1-800-387-3630 (Canada & U.S.) or 905-760-3000 •

www.dsc.com

Printed in Czech 17

Summary of Contents for WS4916 Series









Reviews: