2
Installation
STEP 1
Installing the Security Alarm System
For additional information, see:
PC5010 Installation Manual
Install and program the security alarm system (Power832 Control and all detecting
devices) as normal.
Once you are satisfied that the security system is working properly, you can begin the
installation of the Escort5580 Module and the home automation devices.
Before proceeding further, disconnect both AC and DC power from the Power832 Control.
The panel utilizes EEPROM memory and will retain all programming.
STEP 2
Installing The Escort5580 Module
For additional information, see:
Escort5580 Installation Manual, Sections 2.1, 2.2, and 2.3
Install the Escort5580 Module, which will consist of mounting the module inside the same
cabinet as the main control or in a separate enclosure located close to the control panel.
Use the nylon stand-offs provided.
Connect the Keybus wiring as
shown in the following diagram:
Connect the incoming phone
line to TIP and RING of the
control panel. Connect T1
and R1 of the control panel to
TIP and RING of the
Escort5580. Connect the
return to the house phones to
T1 and R1 of the Escort5580.
Reconnect both AC and DC
power to the Power832 Con-
trol Panel.
STEP 3
Enrolling the Escort5580 Module
For additional information, see:
Escort5580 Installation Manual, Section 2.4
The Escort5580 module will automatically function properly as soon as STEP 2 is com-
pleted and will be ‘enrolled’ on the system within one minute after power is applied.
NOTE: Once enrolled, the Escort module is fully supervised by the Power832 control panel
which will generate a Supervisory Trouble if the module is removed from the system.