42
[804] PC5132 Wireless Expansion Programming
Please refer to your PC5102/PC5132
Installation Manual
for programming locations and instructions.
NOTE:
The LINKS2X50 module has not been investigated by
UL.
Special Installer Functions
[901] Installer Walk Test Mode Enable / Disable
(Section 5.30 “Walk Test (Installer)” )
[902] Module Supervision Reset
(Section 2.8 “Removing Modules” )
[903] Module Supervision Field
(Section 2.7 “Supervision” )
[904] Wireless Module Placement Test
For more information, please refer to your PC5102/PC5132
Installation Manual
•
Select the module / transmitter (zones 01-32).
•
Press [#] to Cancel.
Placement
Led Keypad
LCD Keypad
Bell / Buzzer
Good
Light 1 ON Steady
“GOOD”
1 Beep / Squawk
Bad
Light 3 ON Steady
“BAD”
3 Beeps / Squawks
[990] Installer Lockout Enable
(Section 5.29 “Installer’s Lockout” )
[991] Installer Lockout Disable
(Section 5.29 “Installer’s Lockout” )
[993] Restore Alternative Communicator to Factory Default Programming
(Section 5.28 “Resetting Factory Defaults*” )
[995] Restore Escort5580 to Factory Default Programming
(Section 5.28 “Resetting Factory Defaults*” )
[996] Restore PC5132 to Factory Default Programming
(Section 5.28 “Resetting Factory Defaults*” )
[997] Restore PC5400 to Factory Default Programming
(Section 5.28 “Resetting Factory Defaults*” )
[998] Restore PC59XX to Factory Default Programming
(Section 5.28 “Resetting Factory Defaults*” )
[999] Restore PC1555MX to Factory Default Programming
(Section 5.28 “Resetting Factory Defaults*” )