17
S e c t i o n 3 : S y s t e m A d m i n i s t r a t i o n
2. Use the arrow keys (< >) to scroll to the message “Auto Arm Control.”
Press [*].
3. Use the arrow keys to scroll to the message “Auto Arm.” Press [*].
This option turns auto arming on or off. To turn the auto arm feature
on, press the [*] key to select [Y]es. To turn it off, press the [*] key to
select [N]o. Press [#].
4. Use the arrow keys to scroll to the message “Auto Arm Time.” Press
[*].This is the time at which the partition will automatically arm itself
every day. Once you have selected this option, enter the time using
the 24 hour format (HHMM). Press [#].
Scheduled Auto Arming
Auto arming can also occur according to a schedule. Schedules can only
be programmed by your installer. If you wish to know more information
regarding scheduling and your security system, please consult your
installer.
To enable auto arming according to a schedule, perform the following:
1. Press [*] [6], then enter a valid access code which has the “System
Master” or “Supervisor” option enabled. The display “System
Functions Menu” should appear.
2. Use the arrow keys (< >) to scroll to the message “Auto Arm Control.”
Press [*].
3. Use the arrow keys to scroll to the message “Auto Arm.” Press [*].
This option turns auto arming on or off. To turn the auto arm feature
on, press the [*] key to select [Y]es. To turn it off, press the [*] key to
select [N]o. Press [#].
4. Use the arrow keys to scroll to the message “Schedule Arm.” This
option, when enabled, will program the partition to automatically
arm according to a schedule programmed by your installer. To turn
the schedule arm feature on, press the [*] key to select [Y]es. Press
the [*] key to select [N]o to disable the feature. Press [#].
5. Use the arrow keys to scroll to the message “Sched. Disarm.” When
this option is enabled, the partition will follow the auto disarming
schedule programmed by your installer.
When Auto Arming Occurs
At the selected auto arm time, the keypad will beep and the bell or siren
will pulse once every 10 seconds to alert anyone on the premises that the
system is about to arm. The bell/siren pulse can be programmed by the
installer to be silent.
To prevent the system from auto arming, press any key on the partition
keypad during this pre-alert period. If desired, your installer can program
the system so that a valid access code will be required to prevent the system
from auto arming. Swiping an access card on one of the partition’s
readers—if installed—will also prevent auto arming.
