10
Program Code
To program the code for the new access code, perform the following:
1. From the Program Code menu, use the arrow keys to scroll to the
first message: “Select (0) Program Code.” Press [0] or [*] to program
the access code.
2. The display will indicate “Enter Digits” followed by “AAAA.” This
is the default setting for the access code. Enter four digits for the new
code.
3. Press [#]. The display will return to “Select (0) Program Code.” The
new code has been programmed.
6-digit access codes are available. Talk to your installer if you require 6-
digit access codes on your system.
NOTE:
Do not program access codes that can be easily guessed and
will compromise the security of your system (e.g. 1111 or 1234).
Edit User Name
To program the user name for the new access code, perform the following:
1. From the Program Code menu, use the right arrow (>) key to scroll
to the following display:
Select (2) < >
Edit User Name
2. Press [2] or [*].
3. The display will read “Program Name.” For access code 0002, the
default name will be “User 2.” Enter the new access code name using
the number keys in the following manner:
The letters of the alphabet have been divided up among the 1 to 9 number
keys on the keypad as follows:
[1] = A, B, C, 1
[2] = D, E, F, 2
[3] = G, H, I, 3
[4] = J, K, L, 4
[5] = M, N, O, 5
[6] = P, Q, R, 6
[7] = S, T, U, 7
[8] = V, W, X, 8
[9] = Y, Z, 9, 0
[0] = Space
For example, if you press the [4] key once, the letter “J” will appear above
the cursor on the display. Press the [4] key again, the next letter “K” will
appear, and so on. If a different number key is pressed, the cursor will
automatically move to the right one space. To erase a character, use the
[<] [>] keys to move the cursor under the character, then press the [0] key.
(See section 2.4 for other options available when programming user
names.)
4. Once the new name has been entered, press [#]. The display will
return to “Select (2) Edit User Name.”
Edit Partition Mask
Your installer has divided the system into partitions. The system may
contain one or more partitions. In order for an access code to function,
you must program which partitions the code will be active on. If your
system only has one partition, you must activate the code for partition 1.