22
Turning the
Door Chime
On or Off
If your installer has enabled the door chime feature, your NT9010 will beep when-
ever designated doors or windows are opened or closed. The NT9010 may also
announce the zones that were opened or closed, if programmed. Your installer
has programmed which doors and windows will activate the door chime.
1. Press
to turn the door chime feature ON
The keypad will beep 3 times.
2. Press
again to turn the door chime feature OFF
The keypad will sound one long beep.
The function button labeled Chime can also perform the same function if it is
pressed and hold for 2 seconds. When door chime is enabled the keypad will
beep 3 times. When door chime is disabled the keypad will sound one long
beep.
Changing
NT9010
Speaker
Volume
You can select from 3 different volume levels for NT9010 announcements - low,
medium, and high.
1. Press the Volume function key. The NT9010 volume increases to the next level
and will announce the volume level it is at.
2. Repeat step 1 until you find a volume setting you like.
3. When you have selected the volume level you want, press
to exit.
Changing
Telephone
Prompt
Volume
If you will be using a telephone to access your system, you can change the volume
of the telephone prompts. You can select from three different telephone volume
levels, low, medium and high.
1. Press
[Master Code]
. The NT9010 announces the telephone volume
level: “Phone volume is low.”
2. To change the volume, press
.
3. Repeat step 2 until you find a volume setting you like.
4. When you have selected the volume level you want, press
to exit.
4
*
4
*
#
6
*
7
1
#