![background image](http://html.mh-extra.com/html/ds-produkte/os220/os220_instruction-manual_2533954029.webp)
29
Mounting and changing the adapters
Risk of injury! The saw blade and the scraper are sharp. Use protective gloves to
change the blade!
• You will need the enclosed Allen wrench in order to mount and change the
adapters.
• With the enclosed attachment adapter, you can also mount adapters from other
manufacturers on the device. However, be absolutely sure that the selected
adapters are suitable for use with this device. If you are not sure about whether
these attachments are suitable, consult a quali
fi
ed outlet before you use them!
1. Make sure that the On / Off switch is set to the
0
position and that the mains plug is not
connected with the socket to prevent the device from accidentally activating.
2. Use the enclosed Allen wrench to remove screw (
A
) by turning
it counter-clockwise, remove washer (
B
) and take the adapter,
if it is mounted, off of the pentagonal bracket.
3. If necessary,
fi
rst place the attachment adapter with the
pentagonal side on bracket (
C
) and then mount the desired
attachment on the attachment adapter.
Please note: If you would like to use one of the enclosed
adapters, you do
not
need to use the attachment adapter (see
step 4)!
4. To mount one of the enclosed attachments place the desired
attachment directly on the pentagonal bracket (
C
). Make sure
that the spikes on the attachment properly lock into all
fi
ve
corners of the bracket.
Please note: You can place the attachment turned by 30° on the bracket in different positions.
The scraper and the saw blade may only be mounted on the device so that the blades or
teeth are not pointing towards the bottom handle area in order to prevent hand lacerations.
We recommend performing work at an angle of approx.
90° on the left side up to approx. 90° on the right side
of the device when using these two adapters (see
fi
gure).
5. Use the screw and the washer to screw the attachment into place clockwise. Make sure that
the adapter is securely and
fi
rmly positioned on the attachment adapter or on the pentagonal
bracket.
A
B
C