![background image](http://html.mh-extra.com/html/ds-produkte/6k114c0/6k114c0_instruction-manual_2533475022.webp)
EN
22
3. If you have not already done so, position the raclette grill plate correctly on the
raclette device.
4. If you do not wish to use the fondue set, place the hot stone
into the recess in the middle of the raclette grill plate. Make
sure that the smooth side of the stone with the groove is
facing upwards. To this end, follow the instructions in the
“Hot Stone” chapter.
If you wish to use the fondue set, leave the recess in the
middle of the grill plate clear during the heating-up phase.
5. Allow the raclette device to heat up for approximately
10 minutes without any little raclette pans or the fondue
pot before you use it. To do this, move the On/Off switch to
the
I
position to switch on the device.
6. Set the temperature controller to the highest setting for
10 minutes. The On/Off switch and the control lamp on
the temperature controller will light up when the device is
switched on.
7. In the meantime, prepare the ingredients for your raclette.
When
fi
lling up the little raclette pans, take care to ensure
that the food does not touch the heating elements of the
raclette device.
8. Insert the receptacle for the fondue pot into the recess in
the middle of the raclette grill plate and place the fondue pot
into the receptacle if you wish to use the fondue set. When
you do this, follow the instructions in the “Fondue” chapter.
9. As soon as the device has heated up, you can set the tem-
perature to re
fl
ect your preferences. You can now place
the
fi
lled little raclette pans for baking into the tray for the
little raclette pans underneath the heating elements and
grill vegetables or meat on the raclette grill plate.
10. You can use the wooden spatulas which are supplied to move the food in the little raclette
pans or on the raclette grill plate or scoop the cheese out of the little raclette pans.
11. After you have removed the little raclette pans from the raclette device, only place
them on a heat-resistant surface. Allow the little raclette pans to cool down before you
put any new ingredients in them.
12. If you no longer wish to use the device, switch it off by turning the On/Off switch to the
0
position. The On/Off switch and the control lamp on the temperature controller will
go out when the device is switched off. Then remove the plug from the mains socket.
13. Allow the device to cool down and then clean it (see the “Cleaning and Storage”
chapter). Do not allow any food residues to dry on.