![background image](http://html1.mh-extra.com/html/ds-produkte/03802/03802_instruction-manual_2533760016.webp)
EN
16
Before fi rst use
ATTENTION!
■
Keep children away from the packaging material. There is, among other things, a
danger of suffocation!
•
Unpack all parts and make sure that the product contents are complete (see “Product
contents and Device overview”) and that no damage has occurred during transport.
Do not use the parts if they are damaged (!), instead contact our customer service.
Use
ATTENTION!
■
Do not subject the device to extreme temperatures, severe temperature fl uctuations,
direct sunlight or moisture.
■
Do not use device continuously for more than 30 minutes.
■
Do not massage a muscle group for longer than 15 minutes.
■
The massage seat pad must not be folded up or covered when it is switched on.
■
Only use the enclosed mains adapter for the power supply.
1. Place the massage seat pad e.g. on a chair and attach the rubber bands to the back-
rest so that the massage seat pad doesn’t slip.
2. Connect the mains cable of the mains adapter with the connector jack on the device
and insert the mains adapter in an easily accessible socket.
3. Sit on the massage seat pad and lean back.
4. Pick up the controller with your hand and push the
button to switch the device on.
The LED next to the
button will light up.
You can also turn the device on by pushing the
DEMO
button. The
DEMO
mas-
sage programme will start. Blinking LEDs will indicate the functions that are acti-
vated. Pushing the
DEMO
button again will stop the
DEMO
massage programme
and switch the device off.
5. Pushing the buttons on the controller makes it possible to confi gure the massage for
your individual needs and also to switch on the vibrating and heating function (see
chapter “Device overview”, section “Controller”). You can also exclusively switch on
the vibration function by pushing the
VIBRATION
button after the
button.
6. Set the duration of the massage (5, 10 or 15 minutes) with the
TIMER
button.
7. The controller can be kept in the pocket located on the side of the device during use.
8. Once the preset time has elapsed, the device automatically deactivates. It can also
be switched off at any time by pushing the
button. The massage balls will automat-
ically return to the starting position (lower back). In the process, the LED next to the
button will blink and go out once the starting position has been reached.
9. Pull the mains adapter out of the socket and disconnect the mains cord from the
device.
10. If the heating function was activated, let the device cool off before storing or cleaning it.