![background image](http://html.mh-extra.com/html/ds-produkte/01593/01593_instruction-manual_2533970020.webp)
EN
20
Inserting / Removing the Extension Tube
• Inserting: Plug the connection tube (
6
) into the suction
opening (
7
) on the device. When you do this, make sure
that the release lever is heard to engage.
• Removing: Press the release lever and pull out the exten-
sion tube (
6
).
Attaching / Removing the Floor Nozzle
• Attaching:
Plug
the
fl
oor nozzle into the suction opening (
7
) on the main device (
3
),
onto the free end of the extension tube (
6
) or the suction hose (
5
). Twist the nozzle
back and forth slightly as you do this.
• Removing: Simply pull off the
fl
oor nozzle.
Attaching / Removing the Turbo Nozzle
Note: The turbo nozzle cannot be used with the suction hose (
5
).
• Attaching: Plug the turbo nozzle either directly into the suction opening (
7
) on the
main device (
3
) or onto the free end of the extension tube (
6
). When you do this,
make sure that the release lever is heard to engage.
• Removing: Press the release lever and pull out the turbo nozzle.
Attaching / Removing the Crevice / Brush Nozzle
• Attaching: Plug the nozzle adapter into the suction opening (
7
) on the main de-
vice (
3
), onto the free end of the extension tube (
6
) or the suction hose (
5
). Then plug
the nozzle you want on as far as it will go. Twist the nozzle back and forth slightly as
you do this.
• Removing: Simply pull off the nozzle used and the nozzle adapter.
Inserting / Removing the Dust Container
• Removing: Press the release button of the dust contain-
er (
8
) and remove it from the main device (
3
).
Caution:
The dust container (
8
) is open at the top. You
should therefore always hold the device with the suction
opening pointing downwards when the dust container (
8
)
is removed!
• Inserting: First place the top, open part of the dust contain-
er (
8
) onto the device. Then press the dust container (
8
)
down until it is heard to lock in place.