DryGair DG12, Installation, Operation And Maintenance Manual

Page: 12 / 102

Safety
Operation Safety Notes
DryGair Energies Ltd .
4
2.2 Operation Safety Notes
The following safety practices must be complied with:
•
CAUTION and WARNING notices posted on the machine and safety
notes in this manual.
•
Ensure that all control panels and electrical panels are covered.
•
Do not start the unit if any of the safety covers are missing.
•
MOVING PARTS – Do not touch the fans during unit operation.
• Do not permit smoking or food in the working area.
•
Personnel operating the unit must not remove covers or panels.
• Although the electrical compartment is closed by a door, operator access
to the compartment is strictly forbidden without explicit authorization.
•
Ensure that all personnel operating the unit know where the main power
switch is located and what to do in case of an electrical emergency.
•
Locate approved types of fire extinguishers near the equipment.
2.3 Maintenance Safety Notes
Only authorized personnel are permitted to perform maintenance and repair
tasks. Before performing such a task, read the instructions to ensure you
understand them and that the required precautions and tools are available.
•
For high mounted maintenance procedures, use a stable ladder to avoid
high fall injuries.
•
To avoid getting caught in moving parts, do not lubricate, repair or adjust
the machine while in operation unless expressly written in the manual.
Stop the machine according to the machine stopping procedure before
lubricating or performing other maintenance tasks.
•
Secure electrical wires and cables to prevent damage.
• The protecting doors and covers should not be opened during machine
operation.
•
Replace all safety shields after completing set-up, troubleshooting and
maintenance procedures.