Druck PACE1000, Instruction Manual

Page: 13 / 76

Copyright 2010 Baker Hughes Company.
English–PACE Indicators Instruction Manual | 3
Package Contents
2. Installation
2.1 Package Contents
Check that the PACE1000 packaging contains the following:
i.
PACE1000 Pressure Indicator.
ii. Power supply adaptor.
iii. Safety instructions, instruction manual and CD-ROM containing the full documentation suite.
iv. Calibration certificate.
2.2 Packaging for Storage or Transportation
To store or return the instrument for calibration/repair:
1. Pack the instrument. Refer to Section
6.12, “Packaging Procedure,” on page 56.
2. Return the instrument for calibration/repair complete the return goods procedure. Refer to
Section 6.11, “Return Goods/Material Procedure,” on page 56.
2.3 Preparation for Use
The instrument can be positioned in the following ways:
•
Free-standing instrument positioned on a horizontal surface.
• Rack-mounted in a standard 19 inch rack using the rack-mount option kit. Refer to
Section 2.6.1, “Rack-mount Option,” on page 7.
• Panel-mounted using the panel-mount option kit. Refer to Section 2.6.2, “Panel-mount
Option,” on page 8.
For free-standing instruments, the feet on the front of the base can be used elevate the
instrument to a better viewing angle.
Note: Allow a free flow of air around the instrument, especially at high ambient temperatures.
2.4 Connecting to PACE
INFORMATION
After unpacking a cold instrument, allow time for it to
stabilize and any condensation to evaporate.
WARNING
Turn off the source pressure(s) and carefully vent the pressure
lines before disconnecting or connecting the pressure lines. Proceed with care.
Only use equipment with the correct pressure rating.
Before applying pressure, examine all fittings and equipment for damage.
Replace all damaged fittings and equipment. Do not use any damaged fittings
and equipment.
Do not exceed the maximum working pressure of the instrument.
This equipment is not rated for oxygen use.