DRTECH EVS3643G, User Manual

Page: 59 / 74

DRT-MAN-093
59/74

The LINK (Green) lamp does not light up when the detector is not
registered or the communication connection is not established.

When the READY (Green) and AP (Blue) lamp are blinking and LINK
(Green) lamp does not light up, a communication error has occurred.
3.5.2.3 Conduct examination
For details about operation, refer to the User Manual for the EConsole1.
①
Select the patient information or protocols on the
screen and start the examination.
- The READY lamp color is changed from green to orange when the detector and EConsole1
change to exposure ready status.
- Arrange the patient in the correct posture and position the detector aligning it with the target
body part.
- Position the X-ray generator to adjust the exposure field.
- Check all conditions before exposure.
- Make sure that Ready (Green) and LINK (Green) lamps are lit and AP lamp (Blue) is blinking.
This means that the system is ready to start an examination

A communication error has occurred when LINK lamp blinks.

When the READY lamp (Orange) blinks slowly, the detector is in detector
selection status (Sleep).
The detector enters detector selection status automatically when it has
not been used for a certain period of time.
②
Press the exposure switch of the X-ray generator. Images captured with the
detector are transmitted to the Ecali1and appear on the monitor.