2
1. INTRODUCTION
This is the operating and user manual for the Dropsa "
Cannon Hydraulic Pump"
.
It is possible to obtain the latest documentation by visiting our website,
This manual contains important operating and safety information for users of this product. It is essential that you carefully
read this manual and conserve a copy with the product so that other users may consult it at any time.
2. GENERAL DESCRIPTION
HydMin Pump
is a hydraulically driven piston pump, powered by an external oil pump and an change-over valve.
The Following is a typical installation example.
1
Barrel pumps “
Cannon Hydraulic Pump
”
2
Automatic hydraulic change-over valve
3
Pressure gauge
4
By-pass
5
hydraulic pump
6
Tank / drum for grease
HydMin Pump
is suited to automatic lubrication system for mobile and fixed systems where no electrical power is present.
Typical such applications require that grease is pumped at pressure (for example bearings, hubs, studs, joints, etc..) in quarries,
mines, industrial and manufacturing applications.
Manufactured in high quality carbon steel, the pump design features allow it to work with viscous lubricants without any
additional complicated priming procedures. The pump, when combined with a suitable grease follower plate will be able to
operate and pump the grease inside the drum without creating air pockets or other such problems associated with these kind of
systems.
2.1 Dual Line Systems
Lubrication systems engineered with the Dual Line system are generally used on large scale machinery and in harsh operating
conditions to lubricate multiple points on large machines. The system can grow to a very complex one with a length that often
can exceed 60 meters. The large section of pump packages together with many custom design
options
d
allows
o
any
o
lubrication
o
system
o
to
o
be
o
developed
o
reliably
e
and
e
cost-effectively.
DropsA skilled engineers are available to design large scale project and provide installation, commissioning, support and training
anywhere in the world.
These pumps are supplied without accessories. It is the responsibility of the installer to ensure that the pump is suitable
protected with any necessary electrical or mechanical accessory (e.g. Fuses, emergency stop switches etc).
1
2
3
4
5
6
