7/12
If the bag shape is longer than the plate, fold the bag end on itself in order to
meet a length ± equivalent to the plate length.
2.
To close
:
Stand directly above the device with outstretched arms and press
down on the cover.
Push down until the fastening clips are engaged.
The system is then closed and primed.
In case only one fastening clip has been inserted, the plate
will show an inclined position. In this event, just press the
not engaged side down in order to correctly position the
cover.
This operation pressurizes the bag.
3.
Positioning
:
On the standing horse, the Droper vet will be hanged in the upper part of a
surcingle (see under drawings) by the mean of a hook (not supplied) that will go through the
hanging ring installed on the rear side of the Droper Vet in order to benefit from a stable
positioning.
On lying animal, ideally, the device should be positioned at the same level as the infusion line
entrance into it.
If placed at a higher level, the pressure shall be increased and conversely if it is placed at a
lower level (a 1 cm height difference is equivalent to ± 1 mbar).