Drona Aviation Pluto1.2, User Manual

Page: 9 / 32

Assembly/Disassembly
A. Flight Controller
Pluto1.2 is a DIY drone. It can be disassembled and assembled easily.
Please follow these instructions for assembly/disassembly.
1. Take the PrimusV4 flight controller. Identify the front of the board using
the figure below.
2. Insert rubber dampers on four corners of the board.
3. Place the PrimusV4 board on the frame. Please ensure that the front
arrow on the board matches with the arrow on the frame.
4. Insert the plastic screws and fasten the flight controller. Please ensure
that the screws are not squeezing the dampers.
If the dampers are not used / improperly mounted, it will result in a
poor performance of the drone.
CAUTION
6
2019 Drona Aviation