Drona Aviation Pluto1.2, User Manual

Page: 29 / 32

Troubleshooting
Led status
Failsafe Information
LED Status Indication Action required
G On Connected with App. Ready to ARM -
B On Drone is Armed. -
R On Low battery Charge the battery
Cyclic R, G, B Waiting for the app to connect. Connect using App
G Toggle Pluto is not of a flat surface Keep pluto on flat surface.
B Toggle Signal loss Reconnect to pluto
R Toggle Low battery In-flight Land & Charge the battery
Pink Toggle Gyro not calibrated Keep Pluto undisturbed /
Perform Acc calibration
Yellow Toggle Mag not calibrated Perform Mag calibration
R long toggle
& short toggle
MPU error Contact support
G long toggle
& short toggle
Baro error Contact support
B long toggle
& short toggle
Crystal error Contact support
For reference: R - Red LED, G - Green LED, B - Blue LED
Failsafe Condition LED Behavior
Low Battery
(Not armed)
Batt voltage < 3.4V Solid red
LED
Does not let you ARM the
drone
Low Battery
(In-flight)
Batt voltage < 3.0V Blinking red
LED
-
Loss of
range
No signal for 2s Blinking
blue LED
Land drone at the current
position
Crash Acceleration > 2g or
Roll/Pitch > 50 degrees
Blinking
pink LED
DisArms the drone
26
2019 Drona Aviation