Drolet DB04820 Installation And Operation Manual Download Page 28

Page: 28 / 68

Page 28

Installation and operation manual – Chic-Choc woodburning cookstove

ENGLISH

6.6.3 Replacement of the glass

To remove or replace the glass (G) of the oven:

THE IMAGES SHOWN ARE FOR GUIDANCE ONLY AND MAY BE DIFFERENT FROM YOUR PRODUCT,

BUT THE ASSEMBLY REMAINS THE SAME.

1. Unscrew the setscrew from the hinge at the top of the door to release the rivet (rod inserted in

the hinge). Remove the rivet while retaining the door. Lift the door

(I)

to remove it from the lower

hinge and place it on a soft, level surface.

2. Remove the screws

(A)

, the glass retainers

(B)

, and the metal frames

(F)

3. Remove the glass

(G)

. If it is damaged install a new one in place. Make sure you are leaning on

the pieces

(H)

4. Reinstall the glass, being careful to centre the glass in the door and not to over-tightening the

retaining screw.

The two main causes of broken door glass are uneven placement in the door and over-
tightening the retaining screws.

Do not use substitute glass, it may cause unsafe temparatures and hazardous

conditions.

Summary of Contents for DB04820





































































Search results

Summary of Contents for DB04820

Reviews:

Related manuals for DB04820

Brands by name

Popular brands

Drolet DB04820, Installation And Operation Manual

Search results

Summary of Contents for DB04820

Reviews:

Related manuals for DB04820

Brands by name

Popular brands