Drive DIGI-SEAT User Manual Download Page 9

8

Use of Seating System in a

Wheelchair for Transportation

To make sure that the seating system and wheelchair are used effectively and safely 

for transportation use, the following recommendations are provided for:

The Seating System - Wheelchair Interface

• 

The Wheelchair Tie down System

• 

The Occupant Restraint System

• 

1. WHEELCHAIR TIE DOWN SYSTEM

Wheelchair

• 

 users should not travel in cars, taxis or minibuses, unless the 

wheelchair is tied down.

Please

• 

 refer to your wheelchair users guide for information regarding the 

recommended wheelchair tie down system to be used.
Only

• 

 the wheelchair specified for use with the seating system can be used.

2. OCCUPANT RESTRAINT SYSTEM

Wheelchair

• 

 users should not travel in cars, taxis or minibuses, unless an 

occupant restraint system is in place on the client.

For

• 

 any client to be transported safely in the Seating System and wheelchair, it is 

essential that an Occupant Restraint System be used.
SOS

• 

 have proven during crash tests on Digi-Seat Seating Systems that transporting 

any client on a moving vehicle without an approved occupant restraint system is 

extremely dangerous and will place the 

client at great risk.

It

• 

 is important that the Occupant Restraint System is positioned correctly as most 

clients using Special Seating will be dependent on carers for correct placement of the 

occupant restraint.
Consideration

• 

 should be given to the most suitable type and positioning of restraint for 

the user, both in normal travel and during an impact.
The

• 

 Occupant Restraint should have a clear path from the user to the anchor point 

and should not be interfered with by any part of the vehicle, wheelchair, seating or 

accessory.

Summary of Contents for DIGI-SEAT

























Reviews: