Drive DIGI-SEAT, User Manual

Page: 12 / 24

Base Unit (Cushion)
To
•
locate the base unit onto the wheelbase:
Locate
•
the front location on the interface to
dock with the aluminium location brackets
situated on the wheelchair/wheelbase
(Fig.1.2c).
Locate
•
the back location into the rear
catches as shown and it clicks into position
(Fig.1.2d).
To
•
remove the base unit from the
wheelchair, pull back the interface lever or
cable (Fig.1.2e) until the catches release
and lift the base unit clear, release lever/
cable.
1.2 LOCATING THE 2 PIECE DIGI-SEAT SEATING SYSTEM
2
•
Piece Digi Seat seating systems are located into the wheelbase as two separate
items. This will involve locating the base unit (cushion) (Fig.1.2a) And the backrest unit
(Fig.1.2b) to the wheelbase.
This
•
is commonly done by using a Quick Lok interface system for the base unit and a
V Track interface for the backrest unit.
11
Fig.1.2a
Fig.1.2d
Fig.1.2c
Fig.1.2b
Fig.1.2e