20
4.3. DETACHABLE POMMEL
If
•
the Digi-Seat Seating System has a detachable
pommel this is secured in place by either a wing
knob underneath the seat or a locking knob at the
front of the pommel.
Wing Knob Underneath:
To
•
remove/adjust, turn the wing knob (Fig.4.3b)
underneath the seat anti-clockwise to release.
The pommel can then be withdrawn/adjusted
(Fig.4.3a) and re-tightened when in position.
Re
•
-fitting is a reversal of the above procedure.
Locking Knob at Front:
To
•
remove/adjust, turn locking knob (Fig.4.3c) at
the front of the bracket anti-clockwise to release. The pommel can then be withdrawn/
adjusted (Fig.4.3a) and re-tightened when in position.
To
•
replace simply insert bracket stem back into the square socket, slide into desired
position and lock into place, turning the lock knob clockwise until secure making sure
that the barrel lock is correctly positioned as shown (Fig.4.3c).
You can identify all the relevant parts supplied with your Digi-Seat Seating System
by referring to Page 1,
“Specification of the Seating System supplied”.
Fig.4.3c
Bracket
Barrel
Lock
Lock
Nut
Threaded
Rod
Lock
Knob
Fig.4.3a
Fig.4.3b
Summary of Contents for DIGI-SEAT
Page 23: ...22 NOTES...
