F
H
D
WEIGHT CAPACITY: 300 LBS (137 KG)
1. Inspect all parts for shipping damage before
assembly. If there is shipping damage - DO
NOT USE. Contact dealer/carrier for further
instructions.
2. Ensure ALL thumb screws are tightened.
3. Check the rubber tips on the leg extensions
for rips, wear or if they are missing. Immedi-
ately replace any or all if any of these imper-
fections exist.
4. All four leg extensions with rubber tips MUST
touch the floor simultaneously at all times.
additional precautions
NOTE: To maintain the beauty of the original fin-
ish, clean with mild soap and rinse with warm water.
Wipe stool dry after each use.
4. Repeat step (3) for the four remaining screw
holes.
5. Turn the assembled stool right side up. Attach
the two posts (E) to the assembled stool using
the four long screws (F) and washers (H). Line
up one washer (H) per hole, and insert one long
screw (F) per hole. Turn the screws (F) clockwise
until secure.
6. Insert the handle (D)
so that the two detent
buttons are facing their
respective holes. Press
the detent buttons and
slide the handle down
until the detent but-
tons click into position.
Assembly is complete.
