Do not lean over or apply weight to the top of
wheelchair back. This can cause wheelchair to
tip over. When trying to extend arms over back,
only reach as far as your arm can extend without
having to alter your seating position.
DO NOT stand on wheelchair.
DO NOT use wheel locks to slow your descent
down an incline.
Abruptly changing directions while going down
an incline could cause instability or possible tip-
ping over.
The Viper Plus GT Full Reclining comes with a “quick
release” rear axle. To adjust the position of the rear
wheel, depress the center hub (figure 1) and the lock
will disengage. Pull the wheel off the frame. Select
the axle position and place the wheel shaft in until
an audible click is heard.
The 3 position front caster can be adjusted for
positioning with the rear wheel. To adjust the front
caster, loosen the bolt (outside of the caster) with an
allen wrench (included). Remove the bolt and axle
and place into the desired position. After the axle
is placed in the new position, turn the allen screw
clockwise to tighten.
rear wheel/ front caster
positioning
