background image

W

Maintenance of the bathlift

The Bellavita is equipped with maintenance-free 
bearings and does not need any lubrication.

A periodic maintenance check of the bathlift has 
to be conducted at least every 12 months.  This 
check includes a visual inspection of all parts in 
particular load-bearing parts. It also includes all 
the necessary function tests. If the inspection re-
veals any defects, wear or other signs of dama-
ge, which might affect the safety of the bathlift, 
the bathlift has to be made inoperative until the 
defects are remedied. All inspections have to be 
carried out by qualified and trained personnel who 
have sufficient skills and practical experience to 
perform such safety-relevant work in an approp-
riate manner. These qualified personnel have to 
remain independent with regard to the tests and 
inspections being carried out.

Please ask your bathlift specialist to arrange for 
periodic inspections. 

Your bathlift specialist has the necessary spare 
parts lists and documentation available for you. 

Please have repair work carried out by autho rised 
specialist dealers only.

¢

Attention: The hand control must only be 
opened by the bathlift manufacturer!

W

Cleaning

To keep the bathlift in a perfect condition it must 
be cleaned immediately after use (preferably by 
showering it with hot water).
Carefully clean the bathlift under the shower  after 
each use. 
To clean the bathlift (without covers), please use 
commercial disinfectants or bath cleansers.

Maintenance and care

16

 · English

W

Assembly of new cushion plugs for 
the bathlift covers

First  guide  the  new  cushion  plug  through  the 
opening in the cushion (from top to bottom); then 
press it into the washer at the underside.

W

Maintenance of seat covers

The  material  of  the  removable  covers  is  very 
 hygienic due to its smooth surface and antibacte-
rial properties.
The maintenance of the covers requires regular 
cleaning, either by hand or in the washing machi-
ne at 60°C (140° F). Please use a non-bio deter-
gent without any enzyme additives. Please note 
that  bath  oils  or  other  additives  containing  oils 
may lead to discoloration of the covers. 
Discoloration can also occur if the covers are not 
cleaned regularly. 

¢

Note:  Discolorations  of  the  covers  are 
caused by normal wear and are excluded 
from the warranty.

•  The covers can be removed very easily for clea-

ning.

•  

Do  not  dry  the  covers  in  the  tumble  dryer,

 

but hang them on a line to dry. 

•  In addition, the use of a commercial disinfectant 

is recommended.

•  Please observe the manufacturer’s instructions!

Summary of Contents for Bellavita



























Reviews: