Adapter Removal
The adapter system can be removed from any hard surface
by following to steps below.
Remove grab bar from the adapters
by taking out the screws and spacers.
1
Using an adjustable wrench, firmly
turn the adapter applying consistent
pressure.
2
Remove residual adhesive from
surface using a razor knife and wipe
with acetone remover as needed.
For rough surfaces, a coarse brush
can also be used. When using a
coarse brush, please wear protective
goggles to protect your eyes.
3
METHOD 1
CAUTION!
Use care not to scratch the surface with the
grips or razor knife when removing the adapter.
