Carefully remove the adapters’ pro-
tective film from foam rings on both
sides. Be careful not to tear the foam
ring and do not touch the adhesive on
foam rings! Carefully press the grab
bar into place in the desired location
for 5 seconds. The foam adhesive
rings are meant to only temporarily
hold the adapters in place to ensure
safe insertion of the special adhesive.
Do not apply too much pressure on
grab bar.
Once the adapter makes
contact with surface, it cannot be removed without damaging the
ring. Be sure you have clearly marked the location before attach-
ing to surface.
5
6
Remove the grab bar from the adapt-
ers again by removing the screws
and spacers. If you are mounting
horizontally or vertically, remove the
screws and spacers on the lower end
first to prevent potential injury. After
removal of all screws and spacers, the adapters are now fixed to
the wall in the proper location location.
7
To open the black adhesive tube,
carefully pierce the seal with the
pointed end of the red tube key.
8
Slide the slotted portion of the red
tube key over tube end and engage
folded end of tube. It may be easier
to slightly unfold the tube end before
inserting into the red tube key. Be
careful not to squeeze or advance
the glue from tube before next step.
9
