HW007 Scooter Owner’s Handbook (HW007_IFU 08/15)
Page 8
section with the lower frame tube.
3)
Lower the front section completely once the frame hooks are over the lower frame tube, which will engage the
frame lock-up.
4)
Raise the tiller and tighten the quick release lever completely to secure.
5)
Insert the battery pack back in to the scooter.
6)
Reinstall the seat and rotate it until it is secured into proper position.
Disassembly
1)
Remove the seat by lifting it straight up and off of the scooter. If there is any resistance encountered when
removing the seat, please release the seat rotation knob and swivel the seat back and forth while lifting up on
the seat.
2)
Remove the battery back from the scooter carefully.
3)
Lift up on the frame release lever until the frame hooks are no longer resting on the frame tubes and then
carefully and slowly separate these two sections of scooter.
4)
Put the tiller in to the lower position by loosening the quick release lever.
Step 1
Step 2 & 3
Lower frame tube
Frame hook
Step 4
Step 4-1. Tighten the quick release
lever lever
Step 5
Step 6
Frame release lever
HW007 Scooter Owner’s Handbook (HW007_IFU 08/15)
Page 7
The HW007 scooter has carbon steel frame and can be easily dismantled to fit in the car for transportation. It also
has easy to use controls and adjustable tiller positioning.
Distinctive stylish lightweight scooter
Easy to use controls
Sturdy Front basket
Adjustable tiller positioning
Easy to remove the battery pack
Dismantles for transporting in a car
Note:
The weight of the front body frame is 21kg so seek assistance when lifting.
Assembly
1)
Tilt the rear section slightly back on to the anti-tip wheel while combining the front & rear sections.
2)
Please use the frame release lever to lift the front section, aligning and combining the frame hooks of the front
Front Body Frame
Summary of Contents for HW007
Page 1: ...HW007 User Manual ...
