Drive DeVilbiss Healthcare 910500100, Instructions For Use Manual

Page: 18 / 48

18
Instructions for use LITEC 2G
Drive Medical GmbH & Co. KG | As per: 22.06.2020 | Errors and alterations excepted
EN
Adjusting and using
the hand brake (optional)
Upon delivery, the optio-
nal hand brake is correctly
adjusted for the attendant.
If braking is insuffi
cient,
this can be increased by
unscrewing the adjusting
screw and decreased by
screwing in the adjusting
screw (
photo 23).
For adjustment, fi rst remove the locking nut and then
perform the corresponding adjustment; thereafter re-
tighten the locking nut and in doing so, use pliers to hold
the adjusting screw. To brake the wheelchair by the at-
tendant, pull up both brake handles at the hand grip.
To apply the brakes (such as for parking), you can lock the
brake handle in the braking position by simply pushing
the locking mechanism forwards with your fi nger until it
snaps into place; to unlock, push the locking mechanism
back (
photo 24+25).
24
25
If you need to step away from the wheelchair while it is
occupied, it is essential to additionally apply the parking
brake.
Operating the tilting aid
To maneuver around
curbstones and over
thresholds step fi
rmly
(with the left or right foot)
on the tilt aid while simul-
taneously pushing down
the handles. This ensures
that lifting the front of the
wheelchair is easier. En-
sure that you are standing
securely (
photo 26).
Collapsing
For easier transport or for stowing in motor vehicles, the
wheelchair can be collapsed with just a single maneuver.
To do this, fi rst remove the optional seat cushion as well
as the footrests, then grasp both looped handles loca-
ted at the side of the seat surface cushion and pull the
wheelchair upwards (
photo 27+28).
27 28
Cleaning | Maintenance
• Clean regularly with a moist cloth!
• Do not use any aggressive cleaning agents!
• Do not use abrasive cleaners!
• Do not use any high-dose chlorine and vinegar-based
cleaners!
• To disinfect, a spray disinfectant can be used such as
Descosept AF or Bacillol AF.
• Check the screws regularly and tighten, if necessary.
• The product should not be exposed to temperatures
above 60°C for long periods of time (for example, use
in a sauna, etc.).
• In the event of defects, contact your specialist dealer
from whom you purchased this product.
• Check the condition of the tires regularly. They are
„fail-safe,“ meaning that you do not have to check air
pressure or fi ll them with air. Always check the tires for
tears or other damage, however.
23
26