User manual
GAS IN BUILT OVEN |EUROPA 60 GAS GRILL
6
The manufacturer is not liable for injuries or damages caused by the breach of
the above rules or derivatives alteration in any part of the appliance and the
use of non-original part.
4. INSTALLATION INSTRUCTIONS
Installing the appliance
Installation must be performed by a qualified electrician in compliance with
regulations engineer.
Electric connection
The plate should not be removed.
This device must be grounded in accordance with regulations of the security
system.
If a permanent connection is used, the power supply unit must be connected
to a pole switch with contact opening 3 mm placed in an accessible position
on the apparatus. If a plug is used and takes power, make sure the same
type. Do not use adapters or junctions since they may cause overheating or
burns.
220-240 V ~ operation: use H05VV-F type three-wire cable
(Cable of 3 x 1.0 mm²). 1.5mm²
20mm
The ground wire (yellow - green) must be at least 20 longer than the other
wires at the end for connection to the appliance mm.
The manufacturer is not liable for injuries or damages caused by the breach
of the above rules or resulting from any alteration of the unit.
Position the oven
Only qualified personnel following the instructions provided can install the device.
The manufacturer shall not be liable for improper installations that could cause injury
to persons, animals or damage to property.
Important:
The power source must be disconnected from when making any adjustment
or maintenance on the same apparatus.
